Electric Single Girder Overhead Bridge Cranes Traveling Type
|Motor Power||Lifting Motor||kW||3.2/0.45||3.2/0.45||3.2/0.45||3.2/0.45||3.2/0.45|
|Basic Data||Max.Wheel Load||KN||20.8||22.8||24.8||27.3||31.4|
|Model of End Carriage||HSE125-15||HSE125-20||HSE125-25||HSE125-30||HSE125-35|
|Crane Wheel Qty.||Pcs||4||4||4||4||4|
Single girder Electric Hoist Travelling Bridge crane systems
provide solution for materials handling even when production units
or warehouses are comparatively small and low.To minimize the
capital costs for buildings modifications toprovide extra space, we
utilize the minimum of space for our crane systems.
Compact dimensions, low weight, easy to operate and easy to
maintain, modular design with direct fits between components
Bridge Girder, End carriages, Crab Frame manufactured from box
plate design / Rolled Sections. If required 100% radiography of all
butt welding joints of bridge and end carriages can be provided.
Nante Crane uses sturdy cylindrical/ conical rotor pole-changing
motors with elegant continuous cast aluminum sections, integrated
safety brakes insulation class F, IP54 protection.
Pendant control from floor, master control switches, master
controllers in the driver's cabin can be provided. Radio remote
control can be provided on request.
Modular design, covering a very wide operating range. The systems
are designed for ease of installation and maintenance and reliable
operation, with fuseless circuitry, ducted wiring and non-screwed
terminals. Each drive group is equipped with a motor overload
protection device to provide effective protection against
Every component & part is thoroughly scrubbed & painted
with two coats of primer before assembly & two coats of
synthetic enamel after testing.